Plumbers Torch Causes Fire

On 2-4-08 at 12:05 P.M. the Spokane Fire Department responded 3 engine companies, 2 ladder companies, a rescue company and a battalion chief to an apartment fire located at 2006 W. Gardner. Upon arrival, fire crews found a fire burning on the second level of a 2 story home that had been converted into 4 apartment units. The fire was located in a wall and was rapidly extending into the attic. A rapid search was conducted throughout the structure and it was found that all occupants either had made their way to safety or were not at home. Firefighters had to fight their way through very poor visibility due to the thickening smoke and growing fire. Two teams of ladder crews were able to successfully ventilate the roof by cutting it open with their chain saws. This allowed the build up of heat and smoke to rise and increase visibility while at the same time, help confine the fire by drawing it in one direction. Firefighters were able to contain the fire after 40 minutes. The fire was caused by a plumber’s propane torch that was too close to combustibles while doing some repair work within the home. There were 4 occupants that will be displaced temporarily while repairs are made to the home. These occupants will be staying with friends/relatives. An SFD CARES (community assistance response team) representative was helping with making arrangements for the tenants. A total of 23 firefighters responded on this alarm. There were no injuries to firefighters or civilians. The Spokane Fire Department would like to remind everyone that when using open flame, a clearance of at least 3 feet should be maintained between the flame and the combustibles. It is also recommended that a fully operational extinguisher be kept nearby at all times.


Cause :
A plumber's torch while performing repair work, too close to combustibles.

Damage :
Heavy fire damage to the upstairs bathroom and kitchen. Smoke and water damage throughout the 4 unit apartment building